English
Home
Company
Products
Factories
Staff
Locations
Contact
It's a grey mortar-glue, ready to fix big format bricks in exteriors and in dampness risk zones (kitchen, bathroom, storage rooms, cellars...)
For wall with high-medium absortion ceramics with thick layer (8-13 mm), over bricks and cement.
* Monocomponent mortar-glue (only needs to add water)
* Nule vertical slip
* Thick layer application
* Excellent workabilty by its thickness and plasticity
* High frost resistance
1- Pour the water first and then, the mortar-glue.
2- Mix in bowls in an approximated proportion of 7 litres each 25 kgs.
3- It is very important to not add more water than recommended, because physical and chemical conditions would be then, reduced.
4- Mix by hand or with a mixer machine (better slow, 500 rpm) until getting a creamy paste.
5- Let it repose 5 minutes for the additives to act correctly and then mix again before use.
6- Never add more water after the paste has reposed.
* For wall placing
- Prepare the paste as indicated
- Extend the product with the trowel over the ceramic pieces, for making the assembly in the usual way.
* For ceramic placing in the walls
- Substrate must be clean and dry.
- Apply the product with the dented trowel (no. 8-13) in 1,5 - 2 m2 squares.
- Check that no surfacial film is formed over the adhesive (in such a case, pass the trowel with some fresh product).
Ceramic walls placing with big format and traditional bricks, for interiors and exteriors.
Using substrates: Cement, cement-lime mortar, brick and cement floors.
Substrates must be solid, hard, clean, dry and without deformations.
Do not use: Over metal, concrete or wood
Aspect
Presentation
Paste density
Thickness of the paste in walls
Output in walls
Mix water
Open time according to UNE EN 1346
Waiting time to cut the remaining product (in walls)
Temperature during application
Fire Reaction
Compression resistance
Stockage
(from manufacturation date, under cover, in a dry place)
White/Grey Powder
25 kgs bag and 5 kgs (grey)
1,6 gr/cm3
from 5 to 7 mm
from 3,5 to 4 kgs/m2
6-6,5 litres each 25 kgs
20 minutes
10 minutes
min 5ºC
A1
M10
12 months
* Grey cement
* Syliceous soils
* Additives and resines
Product components are not contact toxic but are toxic to ingestion (in such as a case, go asap to an emergeny health service).
Keep away from children or animals.
Skin: Wash with plenty of water
Eyes: Wash with plenty of water
Ingestion: Rinse with water and drink plenty of water
It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the work conditions.
Technical sheet for 2007.
