English
Home
Company
Products
Factories
Staff
Locations
Contact
t's a liquid with latex base and other chemical products that, mixed with mortar-glues, it reinforce and flexibilize them.
It also provides:
* Plasticity
* Bigger stickness
* Better workability
* Bigger impermeability
* Monocomponent
* Flexible (deformable - elastic)
* Promotes more than 100% the resistance to snatching.
* Impermeabilizes the mortar
1- Mix the product before use
2- Pour the ADESILATEX first and then, the mortar-glue
3- Mix in bowls in an aproximated proportion of 6-6,5 litres per each 25 kgs.
4- Mix by hand or with electric mixer (better slow, 500 rpm) until getting a creamy paste.
5- Never add more ADESILATEX after the paste reposes.
* Prepair the mortar paste substituting the water by ADESILATEX.
* Once mixed the paste,it must be worked like if it was a normal mortar-glue:
- Extend the product with the straight edge of the trowel to ensure a full contact with the placing substrate.
- Apply the dented edge of the trowel (n.6-8) in squares of 1,5 - 2 m2.
- Check that no surfacial film is formed over the glue
(in such a case, it's enough to pass the trowel with some fresh product)
* After 24 hours, cover joints with TAPAZUL or JUNCOLOR mixed with ADESILATEX
Note: For reinforcing paints, add 1 litre of ADESILATEX for each 6 paint litres.
For the possibility of priming for interiors and for outdoor works.
Using substrates: Brick, blocks, sandstone, terracotta, satined concrete, cement roofs, pools, fiber-cement, radiant roofs, wooden roofs, old tiles, paving stone.
Substrates must be solid, clean, dry and without deformations.
Aspect
Presentation
Mix ADESILATEX with mortars and cement-glues
Stockage
(from manufacturing date, under cover, in a dry place)
Whitey liquid
25 and 5 litres carafes
6-6,5 litres per 25 kgs
12 months
* Látex
* Sintetic resins
Product components are not contact toxic but are toxic to ingestion (in such as a case, go asap to an emergeny health service).
Keep away from children or animals.
Skin: Wash with plenty of water
Eyes: Wash with plenty of water
Ingestion: Rinse with water and drink plenty of water
It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the work conditions.
Technical sheet for 2007.
