English
Home
Company
Products
Factories
Staff
Locations
Contact
It's a grey mortar to be projected with machine on brick walls or concrete blocks, acting as a glue for the fiberglass boards or rockwool fixation.
* Easy application with projection machinery.
* Great adherence power for aislant elements placing.
* Waterproof: Protects against humidity.
* Monocomponent.
* This product is specially designed to be applicated with projection machinery
* It's recommended to adjust the machine in a 25% mortar/water relation and modify this relation until getting the paste density wanted.
The mortar/water relation may change depending on working conditions.
* In case of hand application, mix in a 6-7 water litres bowl per each 25 mortar kgs.
* Project with machine the mortar on the wall. The water volume must be graduated to get a paste density with no slipping-off. * Once projected, mortar must be smoothed with a trowel, trying that all the surface is covered and eliminating at once possible air bags.
* Resultant layer width must be between 5 and 8 mm.
* Fix the fiberglass or rockwool panels through manual pression.
It's recommended to place these aislant panels from up to down, for the panels that must be cutted are the ones down, in order to ease the work as much as possible.
* Fix the panels during the "open time" (20 minutes). Out of this time, its properties are reduced.
Aspect
Presentation
Output
Mix water
Paste width
Open time
Temperature during application
Fire Reaction
Stockage
(from manufacturation date, under cover, in a dry place)
Grey Powder
25 kgs bag
6-7 kgs/m2
+/- 25%
5-8 mm
20 minutes
min 3ºC, max 30ºC
A1
12 months
* Grey cement
* Siliceous soils
* Additives and resines
Product components are not contact toxic but are toxic to ingestion (in such as a case, go asap to an emergeny health service).
Keep away from children or animals.
Skin: Wash with plenty of water
Eyes: Wash with plenty of water
Ingestion: Rinse with water and drink plenty of water
It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the work conditions.
Technical sheet for 2007.
