Español English
    DRY MORTAR GREY  
 

Home

Company

Products


Factories


Staff


Locations

Contact


         
  Mortar ready for its mixing  
What does this product work for?


It's a grey mortar ready to use mixed with water.
Its principal applications are given in little domestic use works for brick placing, walls, floors, etc...


Which are its characteristics?

* Easy application

* Ideal product for brickolage

* Great commodity (cement and sand already mixed)

* Great adherence power for aislant elements placing

* Monocomponent


How to prepair the paste?

1- The mixing is traditional, like every mortar.

2- Add the water it needs, to user's convenience until getting a strong and consistent
    (usually 4 litres per each 25 kgs)
Where to use?

Ceramic material placing, for interiors and exteriors

Using substrates: Brick, gypsum-covered bricks, cement, wrinkled paints, gypsum and lime.

Substrates must be solid, hard, clean and dry.

Do not use: Over metal, fiber-cement, wood and old tiles.

For these applications, mix PANZER with ADESILATEX 1000.

Over concrete, mix DRY MORTAR with ADESILATEX 1000.
Technical sheet:


Aspect
Presentation
Resistencia a la compresión a los 28 días
Fire Reaction
Mix water
Chloride content
Water absortion
Use time
Temperature during application
Thermical resistance
Paste density
Stockage
(from manufacturation date, under cover, in a dry place)



Grey Powder
25 kgs bag
M 10
A1
4 litres per each 25 kgs
less 0,01%
0,43 kg/m2 min0,5
1,45 hours
min 3ºC, max 30ºC
-5ºC to 80ºC
1,6 gr/cm3

12 months
Composition:

* Grey cement
* Siliceous soils
* Additives and resines

Precautions:

Product components are not contact toxic but are toxic to ingestion (in such as a case, go asap to an emergeny health service).
Keep away from children or animals.
First Aid:

Skin: Wash with plenty of water
Eyes: Wash with plenty of water
Ingestion: Rinse with water and drink plenty of water

This technical sheet is written up according to our knowledge and essays and doesn't assume any commitment.
It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the work conditions.
Technical sheet for 2007.
«Go up»

                      Make a Request                                            Back to mortars

            Papresa © since 1970 - Paneles Prefabricados S.A. All rights reserved.                                                                                             Copyright        Logos