English
Home
Company
Products
Factories
Staff
Locations
Contact
White gypsum-glue for plastering, repassing or smoothing of the following surfaces:
* Cement covered walls
* Gypsum or lime covered walls
* Brick or gypsum-covered bricks thin walls.
* Gotellet painted walls or until 2 mm wrinkled pastes
* Also used to get rustic terminations in the walls
* Monocomponent gypsum-glue for interior use
* Excellent workability for repassing and plastering gypsum walls with a thin layer.
* Maximum thinness of finishes.
* Minimum joint retraction
1- Pour the water in a drawer and then the product until its saturation.
2- Mix by hand or with a mixer machine (better slow, 500 rpm) until getting a creamy paste.
3- Let it repose 5 minutes for the additives to act correctly.
Notes:
A shaking excess might cause a faster forging.
Never use more water than recommended or add water after letting the paste repose.
ON NEW CONSTRUCTION WALLS (*)
The paste must be pasty but not very dense. It will be applied with a trowel at least three days after placing the walls, with the outlets covered and in the finishing moment to can be painted.
(*) Only over big format bricks and gypsum-covered bricks.
ON GOTELLET PAINTED WALLS
Ready paste will be extended with a trowel over the surface which wants to be smoothed, like plastering. Two layers must be given; one to "fill" the spot and once dry, a second termination layer will be given.
We recommend to sand superficially all the wall to eliminate all the dust and grease and increase it's adherence grade at once.
* It's important that the wall is in good conditions and that layers are between
0,5 and 2 mm because absortion doesn't allow a bigger load.
Paste for wall repairing and smoothing, gotellet painted or wrinkled pastes.
Using substrates: Brick, gypsum-covered bricks, cement, wrinkled paints, gypsum and lime.
Substrates must be solid, hard, clean and dry.
Do not use over: Metal fiber-cement, wood, old tiles or paving stones.
Aspect
Presentation
Output
Mix water
Use time
Forging time
Temperature during application
Thermical resistance
Fire Reaction
Product oldage
Paste density
Stockage
(from manufacturing date, under cover, in a dry place)
White Powder
25 and 4 kgs bags
+/- 1 kg/m2 (depending on spot)
until saturation
35 minutes
1 hour
min 5ºC, max 32ºC
from -5ºC to 80ºC
A1
not in 50 years
1,2 gr/cm3
12 months
* Lime of a purity superior to 95% of calcium sulphate
* Organic and unorganic additives
* Plastifiers and impermeabilizers.
Product components are not contact toxic but are toxic to ingestion (in such as a case, go asap to an emergeny health service).
Keep away from children or animals.
Skin: Wash with plenty of water
Eyes: Wash with plenty of water
Ingestion: Rinse with water and drink plenty of water
It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the work conditions.
Technical sheet for 2007.
