Español English
    PAPRESA WALLS - GRASP PASTE " T "  
 

Home

Company

Products


Factories


Staff


Locations

Contact


         
  Professional glue for wall placing  
What does this product work for?


PAPRESA WALLS is a plaster-glue base adhesive that works for placing of:

* BIG FORMAT BRICK

* GYPSUM BOARDS

* GYPSUM COVERED BRICKS

* MOULDINGS - TILES



Which are its characteristics?

* Excellent workability

* High performance

* Suitable thicken for wall placing.

* Minimum joint retraction

* Great resistance to flexion and compression.

* Monocomponent, without slip.

How to prepair the paste?

1- Pour the water in a bowl and then the product in an approximated proportion of 17 litres each 25 kgs.

2- Mix by hand or with a mixer machine (better slow, 500 rpm) until getting a creamy paste.

3- Let it repose 5 minutes for the additives to act correctly.

Notes: A shaking excess might cause a faster forging.
Never use more water than recommended or add water after letting the paste repose.

How to work?

BIG FORMAT BRICK WALLS

* Place a expanded polystyrene strip glued in both faces over the framework
* Settle the first queue of pieces over the EPS with the male side up.
* Once fixed the first queue, apply adhesive on the male and glue the laterals
* Place the panels, settling them with a rubber mallet.
* The union of the roof is made with a mix of grasp paste and gypsum.
* Clean the joints after half hour.


GYPSUM BOARD WALLS

* Present the gypsum boards over the brick wall.
* Prepair the grasp paste and the boards, cutting outlets, etc...
* With a 10-15 dented trowel, apply the grasp paste over the wall.
* Stick the boards over the wall, pressing to compact it.
* Clean the paste rests.
* Apply and fill the joints with tape and 'Joint Paste' PAPRESA.
Where to use?

Big format ceramics, gypsum boards, gypsum covered bricks, gypsum-plaster walls, for interiors and plaster shelves.

Do not use: Exteriors
Technical sheet:


Aspect
Presentation
Output with big format bricks
Outout with gypsum board
Mix water
Open time
Forging time
Waiting time to plaster
Temperature during application
Thermical resistance
Product oldage
Paste density
Compression resistance according to rule UNE 102031:1999
Fire Reaction
Adherence according to rule UNE EN 12860
Stockage
(from manufacturation date, under cover, in a dry place)



White powder
25 kgs, 4 kgs and 1kg bag
3-4 kgs/m2
3 kgs/m2
17 litres each 25 kg
1 hour
2 hours
4-6 hours
min 5ºC, max 32ºC
from -5ºC to 80ºC
not in 50 years
1,2 gr/cm3
7 N/mm2
A1
OK

12 months
Composition:

* Plaster with over 95% calcium sulphate richness.
* Organic and unorganic additives.
* Plastifiers and impermeabilizers.
Precautions:

Product components are not contact toxic but are toxic to ingestion (in such as a case, go asap to an emergeny health service).
Keep away from children or animals.
First Aid:

Skin: Wash with plenty of water
Eyes: Wash with plenty of water
Ingestion: Rinse with water and drink plenty of water
This technical sheet is written up according to our knowledge and essays and doesn't assume any commitment.
It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the work conditions.
Technical sheet for 2007.

« Go up »

                      Make a Request                                            Back to plaster adhesive

            Papresa © since 1970 - Paneles Prefabricados S.A. All rights reserved.                                                                                             Copyright        Logos