Español English
    TAPAZUL WHITE JOINT COVERER  
 

Home

Company

Products


Factories


Staff


Locations

Contact


         
  White paste to refill thin tiles joints  
What does this product work for?


It's a white paste for 1 to 6 mm joints between medium-high absortion ceramics (tiles, gres, etc) refilling and sealing.

For low absortion ceramics (porcelanics, marble), we recommend TAPAZUL mixed with ADESILATEX.



Which are its characteristics?

* Monocomponent white paste (only needs to add water)

* 1 to 6 mm joint refilling

* Excellent workability and easy application

* High hardness and frost resistant

* Hydrofuge


How to prepair the paste?

1- Pour the water first and then, the joint coverer paste.

2- Mix in bowls in an approximated proportion of 1,2 litres each 4 kgs.

3- It's very important to not add more water than recommended, physical and chemical     conditions of the product would be then, reduced.

4- Mix by hand or with a mixer machine (better slow, 500 rpm) until getting a creamy paste.

5- Let it repose during 5 minutes before application, in order to additives to act correctly and     the, mix again before use.

6- Never add water after the paste reposes.
How to work?

* Rejointment must be done after 24 hours of the ceramics placing.

* Clean well all the rests of adhesive from the joints.

* Mix 'Tapazul' until getting a creamy paste without lumps.

* Fill the joints with product; this operation can be done with different tools: Brush, filling gun,    gum spatula...

* Once the joints are filled, let the product reposes until it starts getting hard, when the    product rests will be cleaned with a sponge.

* After 24 hours of the rejointment, the surface can be cleaned with a wet cloth.

Where to use?

Rejointment of tiles joints of all kind, for interiors or exteriors, specially indicated for minimum distance placing and for joints of until 6 mm.

Joints must be clean and dry.
Technical sheet:


Aspect
Presentation
Joint width
Output
Retraction
Mix water
Use time
Temperature during application
Thermical resistance
Resistencia a la flexión
Compression resistance
Absortion
Sockage
(from manufacturation date, under cover, in a dry place)



White Powder
4 kgs bag
from 1 to 6 mm
(*)
1,39 mm/m
1,2 litres each 4 kg
4 - 6 hours
min 5ºC, max 32ºC
from -5ºC to 80ºC
8,9 N/mm2
49,4 N/mm2
240 min: 0,45 gr

12 months

(*) Output: TAPAZUL output changes with the depth and width of the joints, as well as with the measures of the tiles, according to enclosed chart (approximated outputs):
Ceramics (cm)

5X5
10X10
20X20
30X30


Depth (mm)

4
5
8
10
Width (mm)

2
2
6
5
Consumption (Kg/m2)

0,6
0,4
0,9
0,8
Composition:

* White cement
* Organic and unorganic additives
* Impermeabilizers and plastifiers
Precautions:

Product components are not contact toxic but are toxic to ingestion (in such as a case, go asap to an emergeny health service).
Keep away from children or animals.
First Aid:

Skin: Wash with plenty of water
Eyes: Wash with plenty of water
Ingestion: Rinse with water and drink plenty of water
This technical sheet is written up according to our knowledge and essays and doesn't assume any commitment.
It's on customer's responsibility the admission and control in the distributor's warehouse or construction, as well as the election of the product to be used on each case. Manufacturer's responsibility is limited to manufacturation defects and for the value of the merchandise because it's out of his control the material election and the work conditions.
Technical sheet for 2007.

   
«Go up»

                      Make a Request                                            Back to Joint-Coverer, Sealer

            Papresa © since 1970 - Paneles Prefabricados S.A. All rights reserved.                                                                                             Copyright        Logos